OA NGO Teploavtomat for more than 25 years, develops and manufactures automation equipment for process control systems in the metallurgical, chemical, petrochemical, coke, aviation, mechanical engineering industry, in particular:

1) Control Units BEECH cranes for installation on the drive on-off valves (ball valves, rotary valves) and other rotary devices signaling the end positions
BEECH - for DN 50 to 200mm;
CBO-2 - DN 250 to 1400mm;
BUK-3 - for DN 250 to 1400mm, working pressure from 0.6 MPa to 16 MPa, and also have the opportunity to work with a block of limit switches BKV1.

2) Blocks BKV1 limit switches for remote electrical signaling and the local (visual) signaling the end positions of the closing of ball valves with diameters of conditional passes control from 50mm to 1400mm.

3) Reglyator differential pressure type RPD-3/120-1 designed to maintain a specified difference (pressure difference) over the oil and gas
- Differential pressure transmitters type SPD-10/120 for switching electric circuits when the set point differential pressure controlled environment (similar to the company В«HoneywellВ»)

4) Amplifiers Electric-type UEG.S to control hydraulic actuators is proportional to the electrical input signal their characteristics at the level of foreign analogs firms MOOG, Rexroth; 5) Mechanisms executive pneumatic type IIP to move the regulating and shut-off and the regulatory bodies in the systems automatic and remote control;

6) Hydraulic jacks DW-10 and DW-20.

JSC Dneprometiz is the largest Ukrainian plant manufacturing steel low carbon wire, welding wire, nails, bolts, nuts, chain link mesh, steel fibres.

Concentrate meter, salt meter, Sugar meter, alcohol meter, wort meter, moisture, oil, sulfuric acid, caustic soda, nitric acid calcium.

Main activities: manufacture and repair of pumping equipment for oil production, supply of equipment for oil and gas.

LLC "Elektroizmeritel" produces and exports electro-meter devices (testers) for general use and specialized for power generation, railways, oil and gas industry; boards dispatcher; sets of instruments and ancillary equipment for physics education schools; probes, battery and the instrument clusters to the car "Lanos". Production proved reliability and durability in the highest standards of quality. The products are certified in the "UkrSEPRO", GOST-R. The company is certified by the System ISO9001.

More than 14 years of experience in solving scientific and tehnological, designing, engineering problems allow Materials Research Centre to produce sophisticated and precision laboratory and industrial equipment. Materials Research Centre also offers the wide spectrum of steel constructions and wares in different styles, ranging from the classic to the Hi-tech, made of modern high-quality materials: polished stainless steel, black metal with polymeric coverage, metal composite materials, aluminium, safe architectural glass, plastic, polycarbonate, composites and others materials for forging or casting. The company applies new production technologies adopting European and world experience and new R&D studies.

Concern "METALOKERAM" - Scientific-Production Materials Research Company specializes in research and applied materials science. Main activities:
- Conducting research on the development of scientific bases and
technological realization of the production of powders, materials and products on their
based methods of powder metallurgy and materials processing pressure;
- Production of standard and special (controlled granular structure) powders
cobalt, nickel, tungsten, molybdenum, materials and products made of them;
- Production of standard and special powders of tungsten carbide and, based on their mixtures of hard-VK3-VK20;
- Production of standard and special carbide inserts, dies, blanks, inserts, blanks, insertion toolings, matrices and base plates for the synthesis of diamonds;
- Production of standard and special tungsten-based mixtures of titanium and chromium with nickel, molybdenum, chromium ligaments;
- Production of parts and components for the connector node and communication of
oily high-voltage indictors of voltage transformers and switch currents;
- Production mechanochemically activated non-segregated standard and special connections for the production of diamond tools;
- Production of highly wear-products from hot-pressed special
ceramics based on silicon nitride, oxide and nitride, aluminum for responsible units and petrochemical equipment;
Production of sintered-forming non-magnetic elements pressed ropes of tungsten carbide KTNH 70 for pressing iron in magnetic fields;
- Production of carbide and titanium diboride, titanium double-chromium for
equipment electronic equipment, resistance welding, porodorazruschayuschego,
mining equipment and technology;
- Fulfillment of orders for the creation and production of materials and products of them with special properties and appointments.

Pre-insulated and polyurethane foam polyethylene pipes and PE-RT elements for heat and hot water supply networks;
-Insulating cylinders, semi-cylinders, and plates of basalt fibers;
-Polyethylene tanks (capacities) of water supply, water wells, sewage, telecommunications, tanks, automatic plant biological treatment of domestic and industrial wastewater, sewage pumping stations.

The enterprise presents the services for concrete and ferroconcrete diamond with the wall cutting saws and cable installation. On the other hand we do the job of diamond drilling (boring) of brick, concrete, ferroconcrete and the natural stone. The enterprise supplies the equipment for the diamond cutting and drilling as well as the tools and consumable materials from the lead European manufacturers.

Tekon Ltd. works in the field of automated process management and industrial control systems. It is a distributor of leading European industrial equipment manufacturers: Sterling SIHI GmBH, SPP pumps, PEKOS a.s., Star Line, Schiebel, Rotork (Remote Control), E+H, Krohne, EMERSON, ABB, MMG, AUTEL. Tekon Ltd. provides service and support for pump and test equipment, which includes putting into operation, commissioning and testing, technical audit, technical expertise, repairing services, maintenance etc.